Roll-A-Ramp - Accessories

Compact Centre Support Stands

For those who need a ramp longer than 12 feet (3.05m) we recommend the use of this support unit. One pair at the mid point will allow a Roll-a-Ramp to be constructed up to 20 feet (6.1m) in length.


Centre Support Stands (Long)

For use with ramps longer than 12 ft (3.66m) we advise the use of our centre support stands to both reduce “bounce” and to maintain the weight load integrity of your ramp. The Long centre support stands can extend between 40-55cm in height and the use of just one pair can enable a ramp to be constructed up to 20ft (6.1m) in length. The stands are fitted at approximately 10ft (3.m) intervals.


Handrail Kits

In those situations where a Roll-a-Ramp is installed and Hand rails are desired or recommended, the Roll-a-Ramp handrail set provides security and safety.Constructed of aluminum these rails are strong, light weight and maintenance free just as the Roll-a-Ramp itself.
The specially designed attachment brackets make the total installation quick and secure, yet the entire system can be easily removed to once again make your Roll-a-Ramp portable.


Positive Lock Pins

These quick release pins allow the user to couple and un-couple ramp sections quickly and easily. This assists with easy storage and fast coupling to various Roll-a-Ramp fittings
and brackets.



High quality platform with 21 leg and 3 fine adjustment 4ft (122 cm) square. Allows ample room for wheelchair to turn ideal for allowing two ramps at right angles to cut down gradient. Supplied complete with two sided handrail kit.


Seg Mount Bracket

The Seg Mount (S) Bracket is a quick mounting universal bracket that provides a way to temporarily mount to both homes and vehicles using the ramps approach plate. Thumb screws on the bracket hold the ramp in place and
provide security.


Low Van Entry Plate - 12 ins and 30 ins

These special approach plates are designed for use on Small Van applications. The Low Van Entry Plate will maximize the entry space on a Mini Van and accommodate the fascia that covers the van’s sliding door mechanism. With this upper approach plate the Roll-a-Ramp will allow many clients to ride into the side door of a mini van.


Quick Mount Van Kit

This assembly provides a simple installation of the Roll-a-Ramp into the side door of most full size vans. Using the Roll-a-Ramp manual bi-fold feature makes this a simple inexpensive option to allow many wheelchair users the ability to ride into their vans. The kit includes the mount plate.


Slide Right Angle Bracket

This universal bracket provides a handy method to attach the upper load bearing section of a Roll-a-Ramp to any surface. Excellent for attaching beneath the door of a house or to a van floor.


26Ins Approach Plate for 30Ins Ramp

This special upper approach plate is for those users who need entry into either vans or home with an opening that is less than 30 wide and who still desire or need a full 30 ramp to accommodate their chair needs. The special safety fence will guide the wheelchair through the narrowed opening.


Pick Up Tailgate Bracket

For those who wish to load into the bed of a pickup this bracket provides an extra degree of security by holding the first load bearing section to the pickup tailgate. Bracket must be secured to the tailgate with either rivets or screws. The low profile does not interfere with other uses.



The Spacers are used with the 12 twin track style Roll-a-Ramp sets. These Spacers provide security by making the ramp width constant with each use as well as ensuring that the width does not change. All spacers easily snap into place on the ramp safety rails.


Folding Trolley

This folding trolley makes light work of transporting your Roll-A-Ramp and comes with a strong ratchet strap. Its easy operation and folding facility for storage makes it a valuable accessory.